Inevitably, you will find yourself consumed by an overwhelming desire to see what’s inside the Dingoo. Whether to change the battery, to work out what makes it tick, or just because it’s there, I’ve saved you the trouble! Opening Dingoo, is dead easy, compared with say, cracking the shell on an Xbox 360 . No special tools are required – just a set of mini screwdrivers at a minimum. First, prise off those 4 lovely rubber feet to reveal the screws underneath: Unscrew the screws. Then gently prise Dingoo apart (you can see where the internal clips are in the picture below). Voila! Be sure not to lose the power switch, which might fall off when he case is opened! The battery will appear to be secured to the board somehow. It is actually stuck on to a sticky pad. Use a flat spatula, screwdriver or tweezers and slide underneath the battery from right to left, gently lifting the battery off. Careful, don’t go hard, or you might pull components o...
It's cool. I was waiting this a long time. Thaaaaaanks!!!
ReplyDeleteI tested only one video and it seems has a delay between audio and video.
Hi! As I've stated before, it's a very early alpha release. If you find it delaying, you can try to set autosynch="yes" in /home/.mplayer/config
ReplyDeleteI really hope we can fix most issues with some better configs, but then I think the ingenic-sources have some really big flaws, like I'm unable to use the optimization-features of gcc for the build.
The next days, I'll try to compile a recent svn-snapshot of mplayer (not the ingenic-version) and optimize the hell out of it. See if that will perform even better then ingenics version.
Ingenic released the latest source of mplayer just now, hope it has several improvements.
ReplyDeleteftp://ftp.ingenic.cn/3sw/01linux/05apps ... 03.tar.bz2
New version is out:
ReplyDeletea320.freeforums.org/ingenic-mplayer-now-considered-as-beta-t1188.html
Thanks lordbla! :)