Inevitably, you will find yourself consumed by an overwhelming desire to see what’s inside the Dingoo. Whether to change the battery, to work out what makes it tick, or just because it’s there, I’ve saved you the trouble! Opening Dingoo, is dead easy, compared with say, cracking the shell on an Xbox 360 . No special tools are required – just a set of mini screwdrivers at a minimum. First, prise off those 4 lovely rubber feet to reveal the screws underneath: Unscrew the screws. Then gently prise Dingoo apart (you can see where the internal clips are in the picture below). Voila! Be sure not to lose the power switch, which might fall off when he case is opened! The battery will appear to be secured to the board somehow. It is actually stuck on to a sticky pad. Use a flat spatula, screwdriver or tweezers and slide underneath the battery from right to left, gently lifting the battery off. Careful, don’t go hard, or you might pull components o...
downloading and installing on jxd s5110
ReplyDeletewill get back to you
The firmware is a 1000mhz ics firmware pre rooted with superuser installed. it has a program installed to map your physical keys to the virtual keypad (have to try that out). you seem to be able to pull up the virtual keypad for editing by pressing start+select.
ReplyDeleteits called keymappinghelper
google play works instantly.
also emulators are updated and the external sdcard and internal memory have switched places.
ReplyDeleteThanks Anonymous!
ReplyDeleteno problem :)
ReplyDeletebtw skelton looked at it over at dingoonity, it seems it's a 800mhz firmware wich shows up in setcpu as 1ghz.