Inevitably, you will find yourself consumed by an overwhelming desire to see what’s inside the Dingoo. Whether to change the battery, to work out what makes it tick, or just because it’s there, I’ve saved you the trouble! Opening Dingoo, is dead easy, compared with say, cracking the shell on an Xbox 360 . No special tools are required – just a set of mini screwdrivers at a minimum. First, prise off those 4 lovely rubber feet to reveal the screws underneath: Unscrew the screws. Then gently prise Dingoo apart (you can see where the internal clips are in the picture below). Voila! Be sure not to lose the power switch, which might fall off when he case is opened! The battery will appear to be secured to the board somehow. It is actually stuck on to a sticky pad. Use a flat spatula, screwdriver or tweezers and slide underneath the battery from right to left, gently lifting the battery off. Careful, don’t go hard, or you might pull components o...
Is there a way to watch this page without the widgetes on the right?
ReplyDeleteWhy does the flash bother you? Let me know.
ReplyDeleteIt sure does bothers because of the sound and loading times...
ReplyDeleteI've put a poll up - chip in and I'll see how I feel:)!
ReplyDeleteCheers
Larry
Epic!
ReplyDeleteIt would have been sooo much funnier if it was some nude pics or even better something from a flash pron site so they catch the money shot just as the guy turns round
ReplyDelete