Inevitably, you will find yourself consumed by an overwhelming desire to see what’s inside the Dingoo. Whether to change the battery, to work out what makes it tick, or just because it’s there, I’ve saved you the trouble! Opening Dingoo, is dead easy, compared with say, cracking the shell on an Xbox 360 . No special tools are required – just a set of mini screwdrivers at a minimum. First, prise off those 4 lovely rubber feet to reveal the screws underneath: Unscrew the screws. Then gently prise Dingoo apart (you can see where the internal clips are in the picture below). Voila! Be sure not to lose the power switch, which might fall off when he case is opened! The battery will appear to be secured to the board somehow. It is actually stuck on to a sticky pad. Use a flat spatula, screwdriver or tweezers and slide underneath the battery from right to left, gently lifting the battery off. Careful, don’t go hard, or you might pull components o...
Does anyone know what emulator was being used to run ProGear in this video? When I run it in the standard emulators, my version does not seem so smooth - it seems to stutter...
ReplyDeleteI have no idea how this is happening. I am in shock and I want to play like that! I will not choose an emulator yet until I find out which one will work properly. If you have any advice please post.
ReplyDelete