Inevitably, you will find yourself consumed by an overwhelming desire to see what’s inside the Dingoo. Whether to change the battery, to work out what makes it tick, or just because it’s there, I’ve saved you the trouble! Opening Dingoo, is dead easy, compared with say, cracking the shell on an Xbox 360 . No special tools are required – just a set of mini screwdrivers at a minimum. First, prise off those 4 lovely rubber feet to reveal the screws underneath: Unscrew the screws. Then gently prise Dingoo apart (you can see where the internal clips are in the picture below). Voila! Be sure not to lose the power switch, which might fall off when he case is opened! The battery will appear to be secured to the board somehow. It is actually stuck on to a sticky pad. Use a flat spatula, screwdriver or tweezers and slide underneath the battery from right to left, gently lifting the battery off. Careful, don’t go hard, or you might pull components o...
I tried it and it works quiet nicely. I had issues with Snes9x and ScummVM, but others seem to run fine.
ReplyDeletehttp://www.youtube.com/watch?v=I3hJu97C56k
I tried it with an EasyCap also (for recording), but the video is off horizontally.
I don't get it.
ReplyDeleteHow to edit the option --ntsc and --off????
ReplyDeleteHow to edit the option --ntsc and --off en Gmenu2x ???
ReplyDeleteThat's f***ing awesome. I was waiting for this for ages !
ReplyDelete