Tansoftware releases overclocked firmware for JXD S7800B!

And hopefully, this is the first off the mark of JXD S7800A custom firmware:

S7800B FW v1.0.9 / CPU-1800mhz / GPU-798mhz / DDR2Bus-677mhz - Alpha !!!

« on: Today at 01:54:44 AM »

It's finally here. This is a pure stock of v1.0.9 with an overclocked kernel. All other functionality is identical to original v1.0.9. Even broken root exists, which means you need to fix root upon installing firmware just like official v1.0.9.
WARNING !!! You are at risk of bricking your device should you choose to use the attached firmware & tools. You have been warned. You agree that any liability arising from the usage and/or sharing of the files below is strictly yours and may not be transferred to anyone else in this forum. Use at your own risk !!!
Changes:
- Overclocked CPU speed from 1,608 Mhz to 1,800 Mhz.
- Overclocked GPU speed from 600 Mhz to 798 Mhz.
- Overclocked DDR2 Bus Speed from 400 Mhz to 677 Mhz.
Result:
- Amazing performance & processing speeds for both applications & games :-) I'm not easily impressed :-P
Side Effects:
- Massive drain in power, battery would probably last for 2 hours after a full charge.
- Gradual heat up of unit as processor runs at overclocked speeds.
- Some have reported graphic glitches and system hangs. (Looking into it)
_____________________________________________________________________________________
Installation:
- Included RKbatchTool v1.7 with English Language Support.
- Included all necessary drivers.
- Simply follow the exact same steps to upgrade to JXD's Official Firmware to apply this firmware.
- You will need to Re-root after flashing firmware.
- Install SetCPU or MasterCPU to modify speeds.
This release is intended for testing purposes and is not an official release. It is still in alpha. If for whatever reason, the image fails on your device, just flash the original JXD firmware v1.0.9 to restore capped speeds and normal operation.
ALWAYS MAKE SURE YOUR DEVICE IS FULLY CHARGED BEFORE YOU FLASH ANY FIRMWARE IMAGES
S7800B Firmware v1.0.9_CPU1800mhz_GPU798mhz_DDR2BUS677mhz.zip (346.05 MB)
http://www.multiupload.nl/NHT3QE2FKT

I’m loving this device, hopefully more good stuff is just around the corner!

Comments

  1. please, be carefull

    this overclocking (unnecesary in my opinon) may damage your unit.

    use with care.

    ReplyDelete
  2. Why can i not set clock higher than 1608Mhz? Tried using setcpu. Already flashed. What am i doing wrong?

    ReplyDelete

Post a Comment

Popular posts from this blog

Dingoo A380 Review

Mancala for Dingux released (Mandingoo was released in 1975)

Idiot’s Guide to installing Dingux using Windows released

An interview with the creator of the Tauon PC-1, Volodymyr Mishin

How to show all your 17,083 c64 games from the c64 romset (archive.org) on the C64 Mini or C64 Maxi loader

Tauon PC-1 review

The Dingoo-Scene JXD S7800B (Rockchip 3188 SoC) Android Gaming Console Review

Dingoo representative at a320.freeforums.org !